REX2 4K@30Hz. Extender Set VER 1.
Thank you for purchasing the REX2 Extender The REX2 is a HDMI 1.4b 4K Extender set designed to provide years of reliable service. Please keep this manual as a reference. Surge protection device recommended The external supply is very robust, but a surge device is always good insurance in electrically active areas where the power grid is unreliable. If connected to satellite or cable boxes, the HDSURGE is recommended to prevent surges through the HDMI cable. Table of Contents 1. 2. 3. 4. 5. Introduction.
1. Introduction The REX2 Extender can extend a 1080p AV signal up to 70m (232ft) and a 4K 30hz. signal up to 40m (131ft). The REX2 is compact and robust making it an excellent 1080p extender with the ability to also support 4K@30Hz. Applications would be 1080p video consoles, STB’s, cameras, and DVRs. Other applications could be 4K 30Hz streamers and Blu-Ray Players. 2. Features • Compact Design • IR Pass-through from display back to TX • Supports HDR10/HDR10+/DolbyVision • Supports up to 4K 230Hz.
3. Package Contents 1 1 1 1 2 × × × × × HDMI Transmitter HDMI Receiver IR Blaster Cable IR Receiver Cable 5V/1A DC Power Adapter 1 × User Manual 4. Specifications Technical HDMI Compliance HDCP Compliance Video Bandwidth Video Resolution Audio Support Input TMDS Signal Input DDC Signal ESD Protection HDMI 1.4 HDCP 1.4 10.2Gbps Up to 4K@30Hz Up to 7.1CH HD audio 3.3 volts 5.
Connection Transmitter Receiver Mechanical Housing Color Dimensions Input: 1 x HDMI Type A [19-pin female] Outputs:1 x HDMI Type A [19-pin female] 1 x IR OUT [3.5mm Stereo Mini jack] 1 x CAT OUT [RJ45, 8-pin female] Inputs: 1x IR IN [3.5mm Stereo Mini jack] 1x CAT IN [RJ45, 8-pin female] Output: 1x HDMI Type A [19-pin female] Metal Enclosure Black 79.5mm (3.125”) [W] x 69mm (2.75”) [D] x 16.5mm (0.65”) [H] Weight Transmitter: 132g (4.65 oz.), Receiver: 130g (4.6 oz.
5. Operation Controls and Functions 5.1 Transmitter Panel HDMI IN No. 1 2 3 4 5 6 EDID HDMI OUT IR OUT Name CAT DC 5V Function Description HDMI signal input port. Connect to HDMI source device. The switch is used for selecting EDID: Switch to the right position, the extender will copy EDID HDMI loop out display EDID information to Switch signal source. Switch to the left position, the extender will copy Receiver display EDID to signal source. HDMI signal loop out port.
Link LED 8 DC 5V When the transmitter is connected to HDMI source, the LED will be illuminated. DC 5V power supply port. 5.2 Receiver Panel HDMI OUT No. Name 1 HDMI OUT 2 IR IN 3 Power LED 4 CAT 5 Link LED 6 DC 5V IR IN CAT DC 5V Function Description HDMI signal output port. Connect to HDMI display device such as HDTV. Connect to IR receiver cable, the IR signal will emit to the IR OUT port of the transmitter. When the receiver is powered on, the LED will be on. CAT input port.
5.
6. Application Example HDMI IN EDID HDMI OUT IR OUT Transmitter CAT DC 5V LAN Power Supply CAT5E/6 cable UHDTV HDMI OUT LAN DVD or Blu-ray Player IR Blaster IR IN CAT DC 5V Receiver IR Receiver UHDTV Power Supply The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
7. Warranty Should you feel that this product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of the purchase) either a) repair the product with new or refurbished parts. Or b) Replace the product with new or refurbished product. All Simplified MFG products are covered by a 3-year PARTS and LABOR warranty.
8. Contact Sales and tech support; P. 833-HDMI-411 (833-436-4411) E. info@simplifiedmfg.
REX1 HDMI Extender over single 50m/164ft UTP Cables with IR Control Thank you for purchasing this device The Simplified MFG REXl is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
FEATURES • Allows HDMI Audio/Video and IR signals to be transmitted over a single cat5e/6 cable. • Support copy EDID from receiver display or loop out display. • Allows for cascading via additional HDMI loop out port. • Support Power over cable function. • Transmission Range: Extends 1080p resolution up to 164ft/50m over a single cat5e or Cat6 cable. • Works with 1080p HDMI and HDCP 1.4 compliant devices. • Compact design for an easy and flexible installation.
PANEL DESCRIPTIONS Transmitting unit f ~ -=- ) HDMlln EDID f f f
Receiver unit - © EQ IA In HDMI Out ('.) ••® c~ CAT DCSV CD EQ switch: HDMI Receiver equalizer switch for optimizing the Rx to the Cat5E/Cat6 cable length. @ HDMI out: This connection is for the HDMI cable that runs to your display such as an HDTV or projector. ® IR in: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver. © Power LED: This LED will illuminate when the device is connected with power supply.
R~ 15-30m (49.5 ft - 99ft) MM 130-40m (99ft - 132ft) ~ffl 140-50m(132ft - 164ft) 2 3 5 4 7 6 CONNECTION DIAGRAM _ . .QJllo,Jf . . . . . . . . .
CONNECTION AND OPERATION 1. Connect a 1080p/720p/1080i source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the Transmitting unit. 2. Connect a 1080p/720p/1080i display such as an HDTV or HD Projector to the HDMI output on the Receiving unit. 3. Connect a single Category Se/6 up to 164ft/50m to the output of the Transmitting unit, and the other end to the input of the Receiving unit. 4.
To control the display. Plug IR Blaster into IR TX port of receiver unit; place blaster in front of the IR eye of the display. IR RECEIVER (RX) To control the source. Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display. To control the display. Plug IR Receiver into IR RX port of transmitter unit; place receiver in position where it is able to receive remote signals. IR Blaster _....,....-;---,u, IR Blaster Signal ,...._-:--~ Power s;===---•~ NC IR Receiver IR Signal L.
mishandling, misapplication, alteration, incorrect installation, set-up adjustment, implementation of/to consumer controls, improper maintenance, power line surge, lightening damage, modification, service by anyone other than a manufacturer-approved service center or factory authorized personnel, or damage attributable to acts of God. 2. There are no express warranties except as listed under "limited warranty coverage.
REX2 Quick Start Guide HDMI Source IR IR CAT6/6A/7/8 HDMI HDMI • The REX2 is a 70m 1080p Extender that supports 4K @ 50m (HDCP 1.4 only) • The REX2 has to be powered on both ends. Make sure power connection to the unit is made before plugging in the power adapter to AC. • IR Commands are returned from the display to the Transmitting unit for source control Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.
REX2 4K HDMI 2.0a/b over Category Cable Extender Kit Specifications: Technical HDMI Compliance HDMI 2.0a/b [10.2Gbps, supports HDR & DolbyVision™ HDCP Compliance HDCP 2.2 and HDCP 1.4 Video Bandwidth Color Space 10.2 Gbps up to 4K2K@50/60Hz (YUV4:4:4),4K2K@30Hz,1080P@120Hz, and 1080P 3D@60Hz RGB, YCbCr 4:4:4, YCbCr 4:2:2 Color Depth 10-bit, 12-bit HDMI Audio Formats (Pass-through) LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.
