Owner's Manual

10
MODE 4: The MV2 divides two HDMI inputs with same size and
display on a screen. The LED indicators CH1/CH2 light are on. In the
CH1 window, you can press the CH1 button on-panel or using IR
remote control the Source 1 button to cyclical selection four inputs
source. On the CH2 window, you can press the CH2 button on-panel
or using IR remote control the Source 2 button to cyclical selection
four inputs source.
MODE 5: The MV2 divides four HD inputs and
display on a screen. The LED indicator “4” is on.
Operation method is the same as MODE 2.
7. Remote Control
:Press to toggle power
: Press this button to open or close display
window to toggle positions with cycle button
RES. : Press this button to cycle through
output
resolutions.