Owner's Manual

9
6. Display Modes
The MV2 has 5 display modes. Please see the below;
MODE 1: The MV2 will display each input separately. Press the
CH1/CH2/CH3/CH4 buttons on-panel or using IR remote control to
select the source. The LED indicators will indicate which source is
selected.
MODE 2: The MV2 divides four HD inputs into a “quad” view on the
screen. The LED indicator “4” is on. In the CH1 window, you can
press the CH1 button on-panel or use the remote control to cyclical
input position in the quad view. In the CH2 window, you can press
the CH2 button on-panel or use the remote to cycle input 2’s source,
etc. The rest can be done in the same manner.
MODE 3: The MV2 divides four HD inputs and display on a screen.
The LED indicator “4” is on. Operation method is the same as MODE
2.