EXMICRO2i VER 1.
Thank you for purchasing this product The Simplified MFG EXMICRO2i is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
2. Features • HDMI 2.0b, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant • Supports input and output video resolution up to 4k2k@60Hz 4:4:4 up to 18Gbps • Supports HDR/HDR+ • Distance up to 164ft/50m @ 4k or 1080p • Compact size • Two-way IR transmission HDMI loop output • EDID override (copy display/ 1080p 2 ch./ 4K 2ch./ copy loop out • Single power supply – can be powered from either the RX or TX 3. Package Contents • 1× HDMI 18Gbps transmitter • 1× HDMI 18Gbps receiver • 1× IR Blaster (1.
. Specifications Technical HDMI Compliance HDCP Compliance Video Bandwidth HDR Formats Video Resolution Color Space Color Depth HDMI Audio Formats ESD Protection HDMI 2.0b HDCP 2.2 / HDCP 1.4 18Gbps HDR/HDR10+ Up to 4K60Hz 4:4:4 RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0, YUV 4:4:4 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr 4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4) LPCM 2.0/2.1/5.1/6.1/7.
. Operation Controls and Functions 5.1 Transmitter Panel ❻ ❶ 1 Name HDMI Out 2 HDMI In 3 CAT Out 4 6 7 Power LED (Green) Data signal LED (Orange) SERVICE port IR In 8 IR Out 9 DC 12V Number 5 ❷ ❹ ❸ ❺ ❼ ❽ ❾ Function description HDMI loop output port, connect to HDMI display device such as TV or Projector with an HDMI cable. HDMI input port, connect to HDMI source device such as Media server or other 4K source Connect to CAT IN port on the receiving end with a CAT6 cable.
5.2 Receiver Panel ❺ Number 1 2 3 4 5 6 7 8 ❶ ❸ Name HDMI Out ❷ ❹ ❻ ❼ ❽ Function description HDMI output port, connect to HDMI display device such as TV or Projector with an HDMI cable. CAT In Connect to CAT Out port on the transmitter end with a CAT6 cable. Power LED (Green) The LED will illuminate when the receiver is powered on.
IR Use Example: HDMI Source IR HDMI IR Cat6/6A/7/8 HDMI IR IR 6.
7. Warranty Should you feel that this product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of the purchase) either a) repair the product with new or refurbished parts. Or b) Replace the product with new or refurbished product. All Simplified MFG products are covered by a 3-year PARTS and LABOR warranty.
EXMICRO2i Quick Start Guide HDMI Source IR HDMI IR Cat6/6A/7/8 HDMI • The EXMICRO2i is a 50m HDMI 2.0b (18Gbp)/70m 1080p HDR Extender that is powered at one end (Either) • Make sure supply is connected to TX before connecting to AC outlet • IR Commands are sent to and from both the TX and the RX allowing IR to be sent from source end to display and/or from display end to source end IR IR Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.
How to wire an EXMICRO2 Wiring layout 1. The category cable can be any category cable that is the following: Cat5e/Cat6/Cat6A/Cat7/Cat8 1. El cable de categoría puede ser cualquier cable de categoría que sea el siguiente: Cat5e / Cat6 / Cat6A / Cat7 / Cat8 1. Le câble de catégorie peut être n'importe quel câble de catégorie qui est le suivant : Cat5e/Cat6/Cat6A/Cat7/Cat8 2. The Category cable needs to be terminated in the 568b protocol shown above 2.
How to use and trouble shoot Simplified MFG Extenders Typical Extender use At the TX end: Is everything connected (Cat, HDMI, Power etc)? Is the HDMI cable in the HDMI input of the TX? We often use a loop out, make sure the input is not in this port. What are the lights where the Cat cable plugs into doing? Is the Green Lit Solid? Yes, good! Flashing or off the category cable is poor.
EXMICRO2i HDMI 2.0b (18Gbps) 50m Extender over Category cable Specifications: Technical The EXMICR2i is the latest in the EXMICRO family. It is a HDMI 2.0b (18Gbps) over category cable extender that supports HDR/HDR10+. Other features include single ended power (either end), 50m distance at 4K (70m at 1080p), Bi-Directional 12V IR, HDMI loop out and EDID management. Small, efficient, and powerful. HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 and HDCP 1.
Troubleshooting an Extender At TX end Is everything connected (Cat, HDMI, Power etc)? I the HDMI cable in the HDMI input of the TX? What are the lights where the Cat cable plugs into doing? Is the Green Solid? Yes, good! Flashing or off the category cable is poor Is the Amber Solid? Yes good! Flashing means no HDCP, off means no signal at HDMI port(s) At RX end Is everything connected? Is the Cat from the TX in the correct port (EX2ARC and EXKVM2 have Ethernet ports as well) What are the lights where th
