Owner's Manual

5
5. Operation Controls and Functions
5.1 Transmitter Panel
Numb
er
Name
Function description
1
HDMI OUT
HDMI loop output port, connect to HDMI display device such
as TV or Projector with an HDMI cable.
2 HDMI IN HDMI input port, connect to HDMI source device such as
Media server or other 4K source
3
CAT OUT
Connect to CAT IN port on the receiving end with a CAT6
cable.
4 Power Indicator
Lamp (Green)
The LED will illuminate when the transmitter is powered on.
5
Data signal
Indicator Lamp
(Orange)
The LED will illuminate when the transmitter and the
receiver have signal transmission (link)
6
SERVICE port
For firmware updated use.
7
IR OUT
Connect to wideband IR Blaster (included). The IR signal is
from the IR IN port of the receiver.
8 DC 12V Plug DC 12V/1A power supply into the unit and connect the
adapter to an AC outlet.
(Note: The EXMICRO2 can be powered from either the RX
or the TX by 12V/1A power adapter, only one supply is
needed)