Owner's Manual

4 / 9
SERVICE
5. Operation Controls and Functions
5.1 Transmitter Panel
1 2
TX RX
1
DC 24V
HDMI IN Audio OUT
IR IN IR OUT
RS 232
0
MODE
3 5
4 6 7 8 9 10 11 12
No.
Name
Function Description
1
Power LED
Illuminated Red when power is applied
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports POC function, it means that
either transmitter or receiver is powered on by 24V/1A power
adapter, only one end needs a power supply.
4
CAT OUT
RJ45 connector for connecting the CAT IN port of receiver
with a CAT 5e/6/6A cable.
5
Connection
Signal
Indicator LED
(Green)
▪ Illuminated: Transmitter and Receiver are
connected.
▪ Flashing: Transmitter and Receiver are not connected well.
▪ Da
rk: Transmitter and Receiver are not connected.
6
Data Signal
Indicator LED
(Yellow)
▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
HDMI IN
Connect HDMI source to this input port.
8
Audio OUT
Audio output port, connect to amplifier, monitor or TV.
▪ When eARC/ARC function is turned on, Audio OUT outputs
the audio returned from the HDMI OUT port of the receiver;
▪ When eARC/ARC function is turned off, Audio OUT outputs
the audio extracted from the HDMI IN port of the
transmitter.
CAT OUT