EXeARC1 HDMI 2.0b (18Gbps) Extender set with eARC/ARC VER 1.
Thank you for purchasing the EXeARC1 At Simplified MFG, we strive to make reliable cutting-edge devices and the EXeARC1 is the result of a commitment to deliver cutting-edge devices first. First means nothing if it is not reliable. The EXeARC1 was constructed with the highest grade components available and should provide years of reliable service. Please keep this manual for future reference.
1. Introduction The EXeARC1 is the world’s first eARC HDMI extender kit on category cable. It is designed to return eARC or ARC via the HDMI cable plugged into the TX portion of the extender set. The EXeARC1 supports the HDMI2.0b format (18Gbps) HDR/HDR+/DolbyVision® You can now return Dolby+/Atmos to the AVR from the display. The EXeARC1 also transmits RS232 and 2-Way 12V IR signals as well. The device is powered on a single end (either TX or RX) with a 24V 1A supply. 2.
3. Package Contents Qty Item 1 1 2 18Gbps 50M /W eARC Extender (Transmitter) 18Gbps 50M /W eARC Extender (Receiver) IR Blaster Cable (1.5 meters) 2 20~60KHz IR Receiver Cable (1.5 meters) 4 2 Mounting Ears 3-pin Phoenix Connector 1 24V/1A Locking Power Supply 1 User Manual 4. Specifications Technical HDMI Compliance HDCP Compliance Video Bandwidth Video Resolution Color Space HDMI 2.0b HDCP 2.2 / HDCP 1.4 18Gbps 480i ~1080p50/60Hz, 4Kx2K@24/30Hz, 4k2k@60Hz RGB, YCbCr 4:4:4 / 4:2:2.
Connection Transmitter Input: 1x HDMI Type A [19-pin female] Output: 1x HDMI Type A [19-pin female] 1x CAT OUT [RJ45, 8-pin female] Control: 1x IR IN [3.5mm Stereo Mini-jack] 1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix jack] 1x SERVICE [Micro USB, Update port] Receiver Input: 1x CAT IN [RJ45, 8-pin female] Output: 1x HDMI Type A [19-pin female] Control: 1x IR IN [3.5mm Stereo Mini-jack] 1x IR OUT [3.
5. Operation Controls and Functions 5.1 Transmitter Panel SERVICE 1 2 CAT OUT TX DC 24V 3 No. 5 Name 1 2 Power LED 3 DC 24V 4 6 RX 1 0 HDMI IN Audio OUT 7 8 IR IN IR OUT 9 10 RS 232 MODE 11 12 Function Description Illuminated Red when power is applied SERVICE port Firmware update port. DC 24V/1A power supply input port.
9 IR IN IR input port for receiving the signal of IR remote. IR output port for control of source device. This IR output signal is from the IR IN port of the receiver. 10 IR OUT 3-pin Phoenix connector, connect to a PC or control system for RS-232 command pass-through. Use the switch to set different application scenarios: 11: eARC mode under amplifier control, the TV connected to the receiver supports CEC control, but the Audio OUT doesn’t support CEC control.
5 ▪ Illuminated: Transmitter and Receiver are Connection connected Signal ▪ Flashing: Transmitter and Receiver are not Indicator LED connected well. (Green) ▪ Dark: Transmitter and Receiver are not connected. 6 ▪ Illuminated: HDMI signal with HDCP. Data Signal Indicator LED ▪ Flashing: HDMI signal without HDCP. ▪ Dark: No HDMI signal. (Yellow) 8 HDMI OUT IR IN 9 IR OUT 7 10 RS-232 HDMI signal output port. Connect to TV or amplifier. IR input port for receiving the signal of IR remote.
The following is IR system diagram about IR cable use method.
6.
7. Warranty Should you feel that this product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of the purchase) either a) repair the product with new or refurbished parts. Or b) Replace the product with new or refurbished product. All Simplified MFG products are covered by a 3-year PARTS and LABOR warranty.
EXeARC1 Quick Start Guide CAT6/6A/7/8 Up to 50m/164ft @4K HDMI HDMI Dolby+/Atmos RS232 IR/RS232 to/ from TX Dolby+/Atmos IR/RS232 to/ from TX 042 AVR with eARC Legend ̶ ̶ ̶ ̶ ̶ ̶ ̶ HDMI ̶ ̶ ̶ ̶ ̶ ̶ AV Cat ̶ ̶ ̶ ̶ ̶ ̶ Network ̶ ̶ ̶ ̶ ̶ ̶ Audio Line ̶ ̶ ̶ ̶ ̶ ̶ Speaker ̶ ̶ ̶ ̶ ̶ ̶ Ir TX ̶ ̶ ̶ ̶ ̶ ̶ Ir RX ̶ ̶ ̶ ̶ ̶ ̶ RS232 • • • • Display with eARC The EXeARC1 is the world’s first HDMI2.
How to extract audio from HDMI 1. Audio Extraction with no conversion. AUDEX1 extracts the audio in the format sent up to 5.1 HDMI Cable or Extender Stereo or up to 5.1 Audio AUDEX1 HDMI Optical or Stereo 2. Audio Extraction with down conversion. DAC1 extracts the audio from any format and down converts it to stereo Sound Bar HDMI Cable or Extender with any audio format DAC1 HDMI Optical or Stereo Sound Bar 3.
EXeARC1 HDMI 2.0b (18Gbps) Extender over Category cable with ARC/ eARC Specifications: Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 and HDCP 1.4 Video Bandwidth Color Space 18 Gbps up to 4K2K@50/60Hz (YUV4:4:4),4K2K@30Hz,1080P@120Hz, and 1080P 3D@60Hz RGB, YCbCr 4:4:4, YCbCr 4:2:2 Color Depth 10-bit, 12-bit HDMI Audio Formats (Pass-through) LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.
