Owner's Manual

5
5.2 Receiver Panel
Name
Function description
Power LED
Red LED indicates that power is connected to
Receiver/Decoder
Link LED
• Blinking = Not paired to Receiver
•
Blinking Rapidly = Pairing/Paired
Recess Reset
Button
• Short press will copy EDID of connected display
• 3 Second press will reset the receiver
AC/220V
110/220V cable input (110V Supplied)
HDMI Out
HDMI output for signal to display
IR IN
Connect to wideband IR Receiver. The IR signal will be
transmitted to the IR OUT port of the transmitter.
5.3 IR Pin Definition