Owner's Manual

4 / 9
5.
Operation Controls and Functions
5.1 Transmitter Panel
No.
Name
Function Description
1
Power LED
Red LED will be illuminated when the transmitter has power.
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power supply, the
other one doesn’t need power supply.
4
HDBT OUT
RJ45 connector for connecting the HDBT In port of receiver
with a CAT6/6a cable.
5
Connection
Signal Indicator
LED (Green)
▪ Illuminated: Transmitter and Receiver have a
good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
6
Data Signal
Indicator LED
(Orange)
▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
AUDIO OUT
3.5mm stereo connector for analog audio output.
8
HDMI OUT
HDMI loop output for display.
9
HDMI IN
HDMI source input port.
10
IR IN
IR input port for receiving IR from IR-RX or Control system
11
IR OUT
IR output port for control of source device(s). Thi IR output
signal is from the IR IN port of receiver.
1 2
3 7 8 9 10 125 4 6
SERVICE
AUDIO OUT HDMI IN IR INHDMI OUT IR OUT
HDBT OUT
RS-232
TX RX
DC 24V
11