EX1502K 1080p HDMI Extender over single 150m/500ft.
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended The EX1502K contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Table of Contents Introduction Features Package Contents Specifications Operation Controls and Functions Connection Diagram Warranty Contact Us ----------4----------
Introduction The EX1502K is a 150 meter (500 ft.) HDMI of Category cable extender with Two-Way IR and RS232 transmission. Features 1. HDMI 1.4, HDCP 1.4 and DVI compliant 2. Supports video resolutions up to 1080p/60Hz./YUV4:4:4 3. HBR (High Bit Rate) Audio pass through 4. 150m (500ft.) on Category 6 cable 5. Power can be supplied via one power supply at either the TX or RX device (24V 1A) 6. Two-Way IR 7.
Package Contents (1) HDMI Extender Transmitter (1) HDMI Extender Receiver (1) Wideband IR Emitter (1) Wideband IR Receiver (1) 24V/1A multi-voltage AC power supply (1)User Manual ----------6----------
Specifications HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 1.4 Video Bandwidth 148.5 MHz Video Resolutions 1080p/60Hz, YUV 4:4:4 / RGB 4:4:4 Color Space RGB/YUV 4:2:2, 4:4:4 Color Depth 8 Bit HDMI Audio Formats LPCM, Dolby Digital, DTS 5.
ESD Protection Human Body Model - ±8Kv (Air Gap Discharge) and ±4Kv (Contact discharge) Inputs TX: (1) HDMI Type A (19pin Female) (1) IR Input (3.5mm) (1) RS232 (Phoenix Connector) RX: (1) HDBaseT (RJ-45) (1) IR Input (3.5mm) (1) RS232 (Phoenix Connector) Outputs TX; (1) HDBaseT (RJ-45) (1) IR Output (3.5mm) RX: (1) HDMI Type A (19pin Female) (1) IR Output (3.
Mechanical Housing Metal Enclosure Color Black Dimensions 115mm(4.5”)x64.7mm(2.5”)x17mm(.67”) Weight 406g (14.3 oz.) Power Supply Input AC 100-240V 50/60Hz. Output DV 24V 1 Amp Power Consumption 5.
Operation Controls and Functions Transmitter ❶ Power – System Power indicator ❷ DC 24V – Connection for 24V/1A AC Power Supply ❸ HDBaseT Out – UTP cable Connection for HDBaseT Transmission ❹ HDMI In – HDMI Type A 19 pin signal input ----------10----------
❺ IR In- IR receiver input to receive IR signals ❻ IR Out – IR Emitter connection ❼ RS232 – Phoenix connector for RS232 signal connection Green LED on RJ-45 – Illuminated = TX and RX are communicating properly Flashing = TX and RX have a poor connection Dark = TX and RX have no connection Amber LED on RJ-45 – Illuminated = HDMI input signal has HDCP Flashing = HDMI signal does not have HDCP Dark = HDMI signal is not present ----------11----------
Receiver ❶ Power – System Power indicator ❷ DC 24V – Connection for 24V/1A AC Power Supply ❸ HDBaseT In – UTP cable Connection for HDBaseT from TX device ❹ HDMI Out – HDMI Type A 19 pin output to display ❺ IR In- IR receiver input to receive IR signals ❻ IR Out – IR Emitter connection ----------12----------
❼ RS232 – Phoenix connector for RS232 signal connection Green LED on RJ-45 – Illuminated = TX and RX are communicating properly Flashing = TX and RX have a poor connection Dark = TX and RX have no connection Amber LED on RJ-45 – Illuminated = HDMI input signal has HDCP Flashing = HDMI signal does not have HDCP Dark = HDMI signal is not present ----------13----------
Connection Diagrams Power over Cable Illustration ----------14----------
Bi-Directional IR Illustration RS232 Illustration ----------15----------
Warranty Should you feel your product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of purchase) either: a) Repair the product with new or refurbished parts. or b) Replace it with a new or refurbished product. All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty.
warranty period. A purchase receipt or other proof of original purchase date is required for the limited warranty service. 1.This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.
2.There are no express warranties except as listed under “limited warranty coverage.” The warrantor is not liable for incidental or consequential damage resulting from the use of this product or arising out of any breach of this warranty. For example: damages for lost time, the cost of having a person/persons remove or re-install previously installed equipment, travel to and from service location, loss of or damage to media, images, data or other recorded/stored content.
Simplified MFG Publication Disclaimer The material contained in this document consists of information that is the sole property of Simplified MFG. This document is intended to provide information to allow interfacing to the relevant Simplified MFG equipment by third party products. Simplified MFG IS NOT RESPONSIBLE FOR MALFUNCTIONS AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED BY THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT.
Contact P E 1-833-HDMI-411 info@simplifiedmfg.
EX1502K Quick Start Guide Up to 150m/492ft CAT6/6A/7/8 IR/RS232 to/ from RX IR/RS232 to/ from TX IR/RS232 to/from RX IR/RS232 to/from RX HDMI HDMI Legend ̶ ̶ ̶ ̶ ̶ ̶ ̶ HDMI ̶ ̶ ̶ ̶ ̶ ̶ AV Cat ̶ ̶ ̶ ̶ ̶ ̶ Network ̶ ̶ ̶ ̶ ̶ ̶ Audio Line ̶ ̶ ̶ ̶ ̶ ̶ Speaker ̶ ̶ ̶ ̶ ̶ ̶ Ir TX ̶ ̶ ̶ ̶ ̶ ̶ Ir RX ̶ ̶ ̶ ̶ ̶ ̶ RS232 HDMI Source RS232 • The EX1502K transmits 1080p up to 150m (492ft) • Only one power supply is needed and either end can be powered • The EX1502K has RS232 and 2-Way IR for control (IR Kit
EX1502K HDMI 1.4 1080p Extender over Category cable Specifications: Technical The EX1502K is a HDMI over category cable extender that is designed for longer distance runs (492 ft.). Applications may also include situations were other extender will not work due to some cable issues. Other features include single ended power (either end), Bi-Directional IR (Kit included), & RS232. HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 1.4 Video Bandwidth 148.5 MHz. Video Resolutions 1080p @ 50/60Hz.
