Specifications

INTRODUCING US, a Division of MeiVac, Inc.
US has been an innovative manufacturer of sputtering since 1977. Exclusive licenses were ob-
tained from Stanford University and Lawrence Livermore Laboratory to build and distribute their
patented magnetron sputtering sources on a worldwide basis.
MeiVac, Inc. QUALITY ASSURANCE
All MeiVac products are manufactured under the most stringent conditions. This includes proper
selection & inspection of original materials, assembly in clean environments, and complete testing
for leaks & functionality. These quality products are packaged in durable containers for shipment
throughout the world.
INTRODUCING MAK SPUTTER SOURCES
The MAK sputter sources were designed, developed & tested under controlled laboratory condi-
tions at a major United States government laboratory. This low cost planar magnetron sputtering
source is compact, easy to install and requires no target bonding. All of the MAK sputter sources
(1.3, 2, 3, 4, and 6 inch) provide shielded electrical paths which allow RF as well as DC power to
the cathode with minimum line losses and low reflection of RF power.
The MAK sputter source has a unique feature of allowing low operational pressures (0.5 millitorr)
as well as high operational pressures (600 millitorr) without losing the focused plasma to the target.
The MAK sputter source is available in non-UHV and UHV designs.
Issued September 11, 2008
4