Operator`s manual

unit operation

STARTING THE ENGINE

IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way

meant to replace or supercede engine manufacturer’s operating instructions. In order to obtain optimum

performance from your engine, refer to your engine manual.

WARNING! IMPELLER IS MOUNTED DIRECTLY TO ENGINE SHAFT –

STARTING ENGINE WILL RESULT IN IMMEDIATE HIGH-VELOCITY

DISCHARGE. TO AVOID INJURY OR DAMAGE, BE SURE DISCHARGE IS

POINTED AWAY FROM PEOPLE, PETS AND PROPERTY WHEN STARTING.

BEFORE STARTING ENGINE:

• Be sure that the unit is completely assembled, all fasteners are tightened securely, and all safety guards

and components are in place.

• Be sure to check engine’s oil and fuel levels* and add as needed. (See engine manual for recommended

oil and gasoline specifications.) Never check the engine while it is running or while you are smoking.

Check only when engine is cold.

All machines are shipped without oil or fuel unless otherwise noted.

• Be sure that fuel valve is set to open position.

TO START ENGINE:

• Move choke control located on engine to the

closed “ON” position.

• Move engine speed control, located on the

handle, to the fast “Rabbit” position.

CHOKED

CLOSED

OPEN

ENGINE

SPEED

CONTROL