Specifications

Quality of Service Commands
89
7
Quality of Service
Commands
Use Quality of Service (QoS) commands to configure packet prioritization in
UNIVERGE WL Control System. Packet prioritization ensures that UNIVERGE
WL Controllers and UNIVERGE WL Access Points give preferential treatment to
high-priority traffic such as voice and video.
(To override the prioritization for specific traffic, use access controls lists [ACLs]
to set the Class of Service [CoS] for the packets. See Chapter 14, “Security ACL
Commands,” on page 453.)
This chapter presents QoS commands alphabetically. Use the following table to
locate commands in this chapter based on their use.
QoS Settings show qos on page 92
show qos dscp-table on page 93
set qos cos-to-dscp-map on page 91
set qos dscp-to-cos-map on page 91
clear qos on page 90