Specifications

show roaming station
Chapter 6
VLAN Commands
82
Table 8 describes the fields in the display.
See Also show roaming vlan on page 83
Table 8. Output for show roaming station
Field Description
User Name Name of the user. This is the name used for authentication. The
name resides in a RADIUS server database or the local user
database on a UNIVERGE WL Controller.
Station Address IP address of the user device.
VLAN Name of the VLAN that the RADIUS server or UNIVERGE WL
Controller local user database assigned the user.
State State of the session:
• Setup—Station is attempting to roam to this UNIVERGE WL
Controller. This UNIVERGE WL Controller has asked the
UNIVERGE WL Controller from which the station is roaming
for the station session information and is waiting for a reply.
• Up—UNIVERGE WL Control System has established a tunnel
between the UNIVERGE WL Controllers and the station has
successfully roamed to this UNIVERGE WL Controller over
the tunnel.
• Chck—This UNIVERGE WL Controller is in the process of
accepting a reassociation request from the roaming peer
UNIVERGE WL Controller for a station currently roaming to
the peer UNIVERGE WL Controller.
• TChck—This UNIVERGE WL Controller is in the process of
accepting a reassociation request from the roaming peer
UNIVERGE WL Controller for a station currently roaming to
this UNIVERGE WL Controller.
• WInd—This UNIVERGE WL Controller is waiting for
network congestion to clear before sending the roaming
indication to the roaming peer UNIVERGE WL Controller.
• WResp—This UNIVERGE WL Controller is waiting for
network congestion to clear before sending the roaming
response to the roaming peer UNIVERGE WL Controller.