Specifications

show roaming station
Chapter 6
VLAN Commands
81
Examples The following command lists the number of dynamic entries that the
forwarding database contains:
PROMPT# show fdb count dynamic
Total Matching Entries = 2
See Also show fdb on page 77
show roaming station
Displays a list of the stations roaming to the UNIVERGE WL Controller through
a VLAN tunnel.
Syntax show roaming station [vlan vlan-id] [peer ip-addr]
Defaults None.
Access Enabled.
Usage The output displays roaming stations within the previous 1 second.
Examples To display all stations roaming to the UNIVERGE WL Controller, type
the following command:
PROMPT# show roaming station
User Name Station Address VLAN State
------------------ ----------------- ----------- -------
redsqa 10.10.10.5 violet Up
vlan vlan-id Output is restricted to stations using this VLAN.
peer ip-addr Output is restricted to stations tunnelling through this
peer UNIVERGE WL Controller in the Mobility Domain.