Specifications

show port counters
Chapter 5
Port Commands
62
See Also
l set ip snmp server on page 122
l set snmp community on page 130
l set snmp usm on page 146
l set snmp notify profile on page 132
l show snmp community on page 173
show port counters
Displays port statistics.
Syntax show port counters [octets | packets | receive-errors | transmit-errors
| collisions | receive-etherstats | transmit-etherstats] [port
port-list]
Defaults None.
Access All.
Usage You can specify one statistic type with the command.
Examples The following command shows octet statistics for port 1:
PROMPT> show port counters octets port 1
octets Displays octet statistics.
packets Displays packet statistics.
receive-errors Displays errors in received packets.
transmit-errors Displays errors in transmitted packets.
collisions Displays collision statistics.
receive-etherstats Displays Ethernet statistics for received packets.
transmit-etherstats Displays Ethernet statistics for transmitted packets.
port
port-list List of physical ports. If you do not specify a port
list, UNIVERGE WL Control System displays
statistics for all ports.