Specifications

set trace sm
Chapter 21
Trace Commands
611
set trace sm
Traces session manager activity.
Syntax set trace sm [mac-addr mac-address] [port port-num] [user username]
[level level]
Defaults The default trace level is 5.
Access Enabled.
Examples Type the following command to trace session manager activity for
MAC address 00:01:02:03:04:05
PROMPT# set trace sm mac-addr 00:01:02:03:04:05
success: change accepted.
See Also
l clear trace on page 606
l show trace on page 611
show trace
Displays information about traces that are currently configured on the
UNIVERGE WL Controller, or all possible trace options.
mac-addr mac-address Traces a MAC address. Specify a MAC address,
using colons to separate the octets (for example,
00:11:22:aa:bb:cc).
port port-num Traces a port number.
user username Traces a user. Specify a username of up to
80 alphanumeric characters, with no spaces.
level level Determines the quantity of information included in
the output. You can set the level with an integer
from 1 to 10, where level 10 provides the most
information. Levels 1 through 5 provide
user-readable information. If you do not specify a
level, level 5 is the default.