Specifications

save trace
Chapter 21
Trace Commands
607
To clear the session manager trace, type the following command:
PROMPT# clear trace sm
success: clear trace sm
See Also
l set trace authentication on page 607
l set trace authorization on page 608
l set trace dot1x on page 610
l set trace sm on page 611
l show trace on page 611
save trace
Saves the accumulated trace data for enabled traces to a file in the UNIVERGE
WL Controller’s nonvolatile storage.
Syntax save trace filename
Defaults None.
Access Enabled.
Examples To save trace data into the file trace1 in the subdirectory traces, type
the following command:
PROMPT# save trace traces/trace1
set trace authentication
Traces authentication information.
filename Name for the trace file. To save the file in a subdirectory, specify
the subdirectory name, then a slash. For example: traces/trace1