Specifications

show rfdetect mobility-domain
Chapter 19
RF Detection Commands
569
Usage This command is valid only on the seed UNIVERGE WL Controller of
the Mobility Domain. To display rogue information for an individual UNIVERGE
WL Controller, use the show rfdetect data command on that UNIVERGE WL
Controller.
Examples The following command displays summary information for all SSIDs
and BSSIDs detected in the Mobility Domain:
PROPMT# show rfdetect mobility-domain
Total number of entries: 194
Flags: i = infrastructure, a = ad-hoc, u = unresolved
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
BSSID Vendor Type Flags SSID
----------------- ------------ ----- ------ --------------------------------
00:07:50:d5:cc:91 Cisco intfr i----w r27-cisco1200-2
00:07:50:d5:dc:78 Cisco intfr i----w r116-cisco1200-2
00:09:b7:7b:8a:54 Cisco intfr i-----
00:0a:5e:4b:4a:c0 3Com intfr i----- public
00:0a:5e:4b:4a:c2 3Com intfr i----w wlan
00:0a:5e:4b:4a:c4 3Com intfr ic---- ccmp
00:0a:5e:4b:4a:c6 3Com intfr i----w tkip
00:0a:5e:4b:4a:c8 3Com intfr i----w voip
00:0a:5e:4b:4a:ca 3Com intfr i----- webaaa
...
The lines in this display are compiled from data from multiple listeners
(UNIVERGE WL Access Points radios). If an item has the value unresolved, not
all listeners agree on the value for that item. Generally, an unresolved state occurs
only when a UNIVERGE WL Access Point or a Mobility Domain is still coming
up, and lasts only briefly.
The following command displays detailed information for rogues using SSID
webaaa.
PROPMT# show rfdetect mobility-domain ssid webaaa
BSSID: 00:0a:5e:4b:4a:ca Vendor: 3Com SSID: webaaa
Type: intfr Adhoc: no Crypto-types: clear
Switch-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/1/11 Mac: 00:0b:0e:00:0a:6a
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -85 SSID: webaaa
BSSID: 00:0b:0e:00:7a:8a Vendor: NEC SSID: webaaa
Type: intfr Adhoc: no Crypto-types: clear
Switch-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/1/1 Mac: 00:0b:0e:00:0a:6a
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -75 SSID: webaaa