Specifications

show rfdetect clients
Chapter 19
RF Detection Commands
561
The following command displays more details about a specific client:
PROPMT# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys
Port: ap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: NEC, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about
the most recent 802.11 packet detected from the client.
Table 68 and Table 69 describe the fields in these displays.
Table 68. show rfdetect clients Output
Field Description
Client MAC MAC address of the client.
Client Vendor Company that manufactures or sells the client.
AP MAC MAC address of the radio with which the rogue client
is associated.
AP Vendor Company that manufactures or sells the AP with
which the rogue client is associated.
Port/Radio/Channel AP number, radio number, and channel number of the
radio that detected the rogue.
NoL Number of listeners. This is the number of
UNIVERGE WL Access Points radios that detected
the rogue client.