Specifications

show sessions
Chapter 18
Session Management Commands
535
Defaults None.
Access All, except for show sessions telnet client, which has enabled access.
Examples To view information about sessions of administrative users, type the
following command:
PROMPT> show sessions admin
Tty Username Time (s) Type
------- -------------------- -------- ----
tty0 3644 Telnet(172.16.221.2)
tty2 tech 6 Telnet(172.16.221.3)
tty3 sshadmin 381 SSH(172.16.221.5)
3 admin sessions
To view information about console users’ sessions, type the following command:
PROMPT> show sessions console
Tty Username Time (s)
------- -------------------- --------
console 8573
1 console session
To view information about Telnet users sessions, type the following command:
PROMPT> show sessions telnet
Tty Username Time (s)
------- -------------------- --------
tty2 sea 7395 telnet(172.16.221.3)
To view information about Telnet client sessions, type the following command:
PROPMT# show sessions telnet client
Session Server Address Server Port Client Port
------- -------------- ------------ -----------
0 192.168.1.81 23 48000
1 10.10.1.22 23 48001
Table 62 describes the fields of the show sessions admin, show sessions console,
and show sessions telnet displays.
Table 63 describes the fields of the show sessions telnet client display.
telnet Displays sessions for all users with administrative access to
the UNIVERGE WL Controller through a Telnet connection.
telnet client Displays Telnet sessions from the CLI to remote devices.