Specifications

set dot1x reauth-max
Chapter 17
802.1X Management Commands
522
l show dot1x on page 526
set dot1x reauth-max
Sets the number of reauthentication attempts that the UNIVERGE WL Controller
makes before the supplicant (client) becomes unauthorized.
Syntax set dot1x reauth-max number-of-attempts
Defaults The default number of reauthentication attempts is 2.
Access Enabled.
Examples Type the following command to set the number of authentication
attempts to 8:
PROMPT# set dot1x reauth-max 8
success: dot1x max reauth set to 8.
See Also
l clear dot1x reauth-max on page 516
l show dot1x on page 526
set dot1x reauth-period
Sets the number of seconds that must elapse before the UNIVERGE WL
Controller attempts reauthentication.
Syntax set dot1x reauth-period seconds
Defaults The default is 3600 seconds (1 hour).
number-of-attempts Specify a value between 1 and 10.
seconds Specify a value between 60 (1 minute) and 1,641,600
(19 days).