Specifications

clear dot1x bonded-period
Chapter 17
802.1X Management Commands
514
clear dot1x bonded-period
Resets the Bonded Auth period to its default value.
Syntax clear dot1x max-req
Defaults The default bonded authentication period is 0 seconds.
Access Enabled.
Usage
Examples
To reset the Bonded period to its default, type the following command:
PROMPT# clear dot1x bonded-period
success: change accepted.
See Also
l set dot1x bonded-period on page 518
l show dot1x on page 526
set dot1x reauth-period on page 522
clear dot1x reauth-period on page 516
Retransmission set dot1x max-req on page 520
clear dot1x max-req on page 515
Quiet Period and
Timeouts
set dot1x quiet-period on page 520
clear dot1x quiet-period on page 515
set dot1x timeout auth-server on page 523
clear dot1x timeout auth-server on page 517
set dot1x timeout supplicant on page 524
clear dot1x timeout supplicant on page 517
Settings, Active Clients,
and Statistics
show dot1x on page 526