Specifications

set radius server

Chapter 16

RADIUS and Server Groups Commands

508

l auth-port—UDP port 1812

l acct-port—UDP port 1813

l timeout—5 seconds

l retransmit—3 (the total number of attempts, including the first attempt)

l deadtime—0 (zero) minutes (The UNIVERGE WL Controller does not

designate unresponsive RADIUS servers as unavailable.)

l key—No key

l encrypted-key—No key

l author-password—No Password

Access

Enabled.

Usage

For a given RADIUS server, the first instance of this command must set

both the server name and the IP address and can include any or all of the other

optional parameters. Subsequent instances of this command can be used to set

optional parameters for a given RADIUS server.

To configure the server as a remote authenticator for the UNIVERGE WL

Controller, you must add it to a server group with the set server group command.

Do not use the same name for a RADIUS server and a RADIUS server group.

Examples

To set a RADIUS server named RS42 with IP address 198.162.1.1 to

use the default accounting and authorization ports with a timeout interval of

30 seconds, two transmit attempts, 5 minutes of dead time, and the key string of

keys4u, type the following command:

Controller# set radius server RS42 address 198.162.1.1 timeout 30 retransmit 2

deadtime 5 key keys4U