Specifications

clear radius
Chapter 16
RADIUS and Server Groups Commands
500
clear radius
Resets parameters that were globally configured for RADIUS servers to their
default values.
Syntax clear radius {deadtime | key | retransmit | timeout}
Defaults Global RADIUS parameters have the following default values:
l deadtime—0 (zero) minutes (The UNIVERGE WL Controller does not
designate unresponsive RADIUS servers as unavailable.)
l key—No key
l retransmit—3 (the total number of attempts, including the first attempt)
l timeout—5 seconds
Access Enabled.
Usage To override the globally set values on a particular RADIUS server, use the
set radius server command.
Examples To reset all global RADIUS parameters to their factory defaults, type
the following commands:
PROMPT# clear radius deadtime
success: change accepted.
PROMPT# clear radius key
success: change accepted.
PROMPT# clear radius retransmit
deadtime Number of minutes to wait after declaring an unresponsive
RADIUS server unavailable before retrying the RADIUS
server.
key Password (shared secret key) used to authenticate to the
RADIUS server.
retransmit Number of transmission attempts made before declaring an
unresponsive RADIUS server unavailable.
timeout Number of seconds to wait for the RADIUS server to
respond before retransmitting.