Specifications

show security acl map
Chapter 14
Security ACL Commands
474
set security acl ip acl_123 (ACEs 3, add 3, del 0, modified 0)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
3. deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits
See Also
l clear security acl on page 454
l commit security acl on page 458
l set security acl on page 460
show security acl map
Displays the VLANs, ports, and virtual ports on the UNIVERGE WL Controller
to which a security ACL is assigned.
Syntax show security acl map acl-name
Defaults None.
Access Enabled.
Examples The following command displays the port to which security ACL
acl_111 is mapped:
PROMPT# show security acl map acl_111
ACL acl_111 is mapped to:
ap 4 in
See Also
l clear security acl map on page 456
l set security acl map on page 467
l show security acl on page 470
acl-name Name of an existing security ACL for which to show static
mapping. ACL names must start with a letter and are
case-insensitive.