Specifications

set security acl map
Chapter 14
Security ACL Commands
467
set security acl map
Assigns a committed security ACL to a VLAN, physical port or ports, virtual port,
or UNIVERGE WL Access Points on the UNIVERGE WL Controller.
Syntax set security acl map acl-name {vlan vlan-id | port port-list [tag tag-list]
| ap ap-num} {in | out}
Note. To assign a security ACL to a user or group in the local UNIVERGE WL
Controller database, use the command set user attr, set mac-user attr, set
usergroup attr, or set mac-usergroup attr with the Filter-Id attribute. To
assign a security ACL to a user or group with Filter-Id on a RADIUS server, see
the documentation for your RADIUS server.
acl-name Name of an existing security ACL to map. ACL names start
with a letter and are case-insensitive.
vlan vlan-id VLAN name or number. UNIVERGE WL Control System
assigns the security ACL to the specified VLAN.
port port-list Port list. UNIVERGE WL Control System assigns the
security ACL to the specified physical UNIVERGE WL
Controller port or ports.
tag tag-list One or more values that identify a virtual port in a VLAN.
Specify a single tag value from 1 through 4093. Or specify a
comma-separated list of values, a hyphen-separated range, or
any combination, with no spaces. UNIVERGE WL Control
System assigns the security ACL to the specified virtual port
or ports.
ap ap-num One or more UNIVERGE WL Access Points, based on their
connection IDs. Specify a single connection ID, or specify a
comma-separated list of connection IDs, a hyphen-separated
range, or any combination, with no spaces. UNIVERGE WL
Control System assigns the security ACL to the specified
UNIVERGE WL Access Points.