Specifications

clear security acl map
Chapter 14
Security ACL Commands
457
Defaults None.
Access Enabled.
Usage To clear a security ACL map, type the name of the ACL with the VLAN,
physical port or ports, virtual port tag, or UNIVERGE WL Access Points and the
direction of the packets to stop filtering. This command deletes the ACL mapping,
but not the ACL.
Examples To clear the mapping of security ACL acljoe from port 1 for incoming
packets, type the following command:
PROMPT# clear security acl map acljoe port 1in
clear mapping accepted
To clear all physical ports, virtual ports, and VLANs on a UNIVERGE WL
Controller of the ACLs mapped for incoming and outgoing traffic, type the
following command:
PROMPT# clear security acl map all
success: change accepted.
See Also
l clear security acl on page 454
l set security acl map on page 467
l show security acl map on page 474
ap ap-num One or more UNIVERGE WL Access Points, based on
their connection IDs. Specify a single connection ID, or
specify a comma-separated list of connection IDs, a
hyphen-separated range, or any combination, with no
spaces. UNIVERGE WL Control System removes the
security ACL from the specified UNIVERGE WL
Access Points.
in Removes the security ACL from traffic coming into the
UNIVERGE WL Controller.
out Removes the security ACL from traffic going out of the
UNIVERGE WL Controller.