Specifications

show igmp receiver-table
Chapter 13
IGMP Snooping Commands
446
See Also set igmp querier on page 436
show igmp receiver-table
Displays the receivers to which a UNIVERGE WL Controller forwards multicast
traffic. You can display receivers for all VLANs, a single VLAN, or a group or
groups identified by group address and network mask.
Syntax show igmp receiver-table [vlan vlan-id] [group group-ip-addr/
mask-length
]
Defaults None.
Access All.
Table 55. Output for show igmp querier
Field Description
Querier for vlan VLAN containing the querier. Information is listed
separately for each VLAN.
Querier-IP IP address of the querier interface.
Querier-MAC MAC address of the querier interface.
TTL Number of seconds before this entry ages out if the
UNIVERGE WL Controller does not receive a query
message from the querier.
vlan
vlan-id VLAN name or number. If you do not specify
a VLAN, UNIVERGE WL Control System
displays the multicast receivers on all VLANs.
group
group-ip-addr/mask-length
IP address and subnet mask of a multicast
group, in CIDR format (for example,
239.20.20.10/24). If you do not specify a
group address, UNIVERGE WL Control
System displays the multicast receivers for all
groups.