Specifications

show system
Chapter 4
System Services Commands
41
Table 2. show system Output
Field Description
Product Name UNIVERGE WL Controller model number.
System Name System name (factory default, or optionally configured with set
system name).
System Countrycode Country-specific 802.11 code required for AP operation
(configured with set system countrycode).
System Location Record of UNIVERGE WL Controller’s physical location
(optionally configured with set system location).
System Contact Contact information about the system administrator or another
person to contact about the system (optionally configured with set
system contact).
System IP Address Common interface, source, and default IP address for the
UNIVERGE WL Controller, in dotted decimal notation
(configured with set system ip-address).
System idle timeout Number of seconds UNIVERGE WL Control System allows a
CLI management session (console, Telnet, or SSH) to remain idle
before terminating the session. (The system idle timeout can be
configured using the set system idle-timeout command.)
System MAC UNIVERGE WL Controller media access control (MAC)
machine address set at the factory, in 6-byte hexadecimal format.
Hardware Key UNIVERGE WL Controller Hardware Key in the WL5100.
It is an unique number every UNIVERGE WL Controller.
Boot Time Date and time of the last system reboot.
Uptime Number of days, hours, minutes, and seconds that the
UNIVERGE WL Controller has been operating since its last
restart.