Specifications

set igmp querier
Chapter 13
IGMP Snooping Commands
436
set igmp querier
Enables or disables the IGMP pseudo-querier on a UNIVERGE WL Controller ,
on one VLAN or all VLANs.
Syntax set igmp querier {enable | disable} [vlan vlan-id]
Defaults The pseudo-querier is disabled on all VLANs by default.
Access Enabled.
Usage UNIVERGE WL Control System recommends that you use the
pseudo-querier only when the VLAN contains local multicast traffic sources and
no multicast router is servicing the subnet.
Examples The following example enables the pseudo-querier on the orange
VLAN:
PROMT# set igmp querier enable vlan orange
success: change accepted.
See Also show igmp querier on page 444
set igmp receiver
Adds or removes a network port in the list of ports on which a UNIVERGE WL
Controller forwards traffic to multicast receivers. Static multicast receiver ports
are immediately added to or removed from the list of receiver ports and do not age
out.
enable Enables the pseudo-querier.
disable Disables the pseudo-querier.
vlan
vlan-id VLAN name or number. If you do not specify a VLAN, the
pseudo-querier is enabled or disabled on all VLANs.