Specifications

set igmp mrsol mrsi
Chapter 13
IGMP Snooping Commands
431
Defaults Multicast router solicitation is disabled on all VLANs by default.
Access Enabled.
Examples The following command enables multicast router solicitation on
VLAN orange:
PROMT# set igmp mrsol enable vlan orange
success: change accepted.
See Also set igmp mrsol mrsi on page 431
set igmp mrsol mrsi
Changes the interval between multicast router solicitations by a UNIVERGE WL
Controller on one VLAN or all VLANs.
Syntax set igmp mrsol mrsi seconds [vlan vlan-id]
Defaults The interval between multicast router solicitations is 30 seconds by
default.
Access Enabled.
Examples The following example changes the multicast router solicitation
interval to 60 seconds:
PROMT# set igmp mrsol mrsi 60
success: change accepted.
disable Disables multicast router solicitation.
vlan
vlan-id VLAN name or number. If you do not specify a VLAN,
multicast router solicitation is disabled or enabled on all
VLANs.
seconds Number of seconds between multicast router solicitations.
You can specify a value from 1 through 65,535.
vlan
vlan-id VLAN name or number. If you do not specify a VLAN,
UNIVERGE WL Control System changes the multicast
router solicitation interval for all VLANs.