Specifications

set igmp mrouter
Chapter 13
IGMP Snooping Commands
430
set igmp mrouter
Adds or removes a port in a UNIVERGE WL Controller list of ports on which it
forwards traffic to multicast routers. Static multicast ports are immediately added
to or removed from the list of router ports and do not age out.
Syntax set igmp mrouter port port-list {enable | disable}
Defaults By default, no ports are static multicast router ports.
Access Enabled.
Examples The following command adds port 1 as a static multicast router port:
PROMT# set igmp mrouter port 1enable
success: change accepted.
The following command removes port 1 from the static multicast router port list:
PROMT# set igmp mrouter port 1disable
success: change accepted.
See Also show igmp mrouter on page 443
set igmp mrsol
Enables or disables multicast router solicitation by a UNIVERGE WL Controller
on one VLAN or all VLANs.
Syntax set igmp mrsol {enable | disable} [vlan vlan-id]
port
port-list Port list. UNIVERGE WL Control System adds or removes
the specified ports in the list of static multicast router ports.
enable Adds the port to the list of static multicast router ports.
disable Removes the port from the list of static multicast router ports.
enable Enables multicast router solicitation.