Specifications

show voip max-sessions
Chapter 12
AP Commands
423
show voip max-sessions
Displays the number of sessions and per-session bandwidth that can be supported
by a single radio, for a specific aggregate bandwidth.
Syntax show voip max-sessions bw
Defaults None.
Access Enabled.
Usage The bw value you enter is the aggregate bandwidth for all NEC VoIP
sessions on a radio. The bandwidth values in the output are per individual session.
Examples The following command displays the maximum number of sessions
and the effective bandwidth for each session possible for each configurable
sample period, for a maximum of 500 Kbps of total reserved bandwidth per
session.
PROMPT# show voip max-sessions 500
Codec 10ms 20ms 30ms 40ms
---------------------------------------------------------------------------
G.711 4@ 121.6 5@ 92.8 6@ 83.2 6@ 78.4
G.729 7@ 65.6 13@ 36.8 18@ 27.2 22@ 22.4
Table 51 describes the fields in this display.
bw Aggregate bandwidth, in Kbps. The output shows the
number of sessions and bandwidth per session that can be
supported on a radio based on the bw you specify.