Specifications

show radio-profile
Chapter 12
AP Commands
412
See Also
l set radio-profile active-scan on page 300
l set radio-profile auto-tune channel-config on page 301
l set radio-profile auto-tune channel-holddown on page 303
l set radio-profile auto-tune channel-interval on page 304
l set radio-profile auto-tune power-config on page 305
QoS Mode Indicates the Quality-of-Service setting for
UNIVERGE WL Access Points radio forwarding
queues:
• voice-ext—Priority treatment is provided to voice
traffic for NEC handsets.
• svp—UNIVERGE WL Access Points forwarding
queues are optimized for SpectraLink Voice
Priority (SVP).
• wmm—UNIVERGE WL Access Points
forwarding queues provide standard priority
handling for WMM devices. Traffic is classified
and marked based on 802.1p and DSCP values.
For information about the QoS modes, see the
“Configuring Quality of Service” chapter in the
Configuration Guide.
Service profiles Service profiles mapped to this radio profile. Each
service profile contains an SSID and encryption
information for that SSID.
Note: An asterisk ( * ) next to the service profile
name indicates that the CAC mode of the service
profile is set to voice-ext. For a radio to provide
bandwidth-based voice service to clients, the QoS
mode of the radio profile must be voice-ext and the
CAC mode of the service profile mapped to the radio
profile must also be voice-ext.
Table 48. Output for show radio-profile
Field Description