Specifications

show ap status
Chapter 12
AP Commands
392
Table 40. Output for show ap status
Field Description
AP Identifier for the UNIVERGE WL Access Points on
the UNIVERGE WL Controller.
IP-addr IP address of the UNIVERGE WL Access Points.
The address is assigned to the UNIVERGE WL
Access Points by a DHCP server.
Note: This field is applicable only if the UNIVERGE
WL Access Points is not directly attached to the
UNIVERGE WL Controller.
AP model AP model number.
manufacturer Company that made the AP.
fingerprint Hexadecimal fingerprint of the UNIVERGE WL
Access Points public encryption key.
Note: This field is displayed only if the UNIVERGE
WL Access Points is not directly attached to the
UNIVERGE WL Controller.
name AP name.
Link Status of this link with the AP at the other end of the
link. The status can be up or down.