Specifications

show ap status
Chapter 12
AP Commands
390
See Also
l show ap config on page 374
show ap status
Displays AP and radio status information.
Syntax show ap status [terse] | [ap-number | all [radio {1 | 2}]]
Status Association status of the AP:
• Accepting—The AP is accepting new
associations.
• Refusing—The AP is refusing new associations.
Refused Number of association requests refused by the AP
due to load balancing. UNIVERGE WL Control
System resets this counter to 0 when the UNIVERGE
WL Controller is restarted, UNIVERGE WL Control
System is reloaded, or the AP is removed from the
group.
terse Displays a brief line of essential status information for each
UNIVERGE WL Access Points.
ap-number Index value that identifies the UNIVERGE WL Access
Points on the UNIVERGE WL Controller.
all Shows status information for all directly attached
UNIVERGE WL Access Points and all UNIVERGE WL
Access Points configured on the UNIVERGE WL
Controller.
radio 1 Shows status information for radio 1.
radio 2 Shows status information for radio 2. (This option does not
apply to single-radio models.)
Table 39. Output for show ap group
Field Description