Specifications

show ap group
Chapter 12
AP Commands
389
show ap group
Displays configuration information and load-balancing status for AP groups.
Syntax show ap group [name]
Defaults None.
Access Enabled.
Examples The following command displays information for AP group
loadbalance1:
PROMPT# show ap group loadbalance1
Load Balance Grp Port Clients Status Refused
---------------- ---- ------- --------- -------
loadbalance1 1 ap1 Accepting 0
loadbalance1 7 ap6 Refusing 2
Table 39 describes the fields in this display.
name Name of an AP group.
Table 39. Output for show ap group
Field Description
Load Balance Grp Name of the AP group.
Port UNIVERGE WL Controller port number.
Clients Number of active client sessions on the AP.