Specifications

show ap counters
Chapter 12
AP Commands
379
6.0: 0 0 0 0 0 0 0 0 51
9.0: 0 0 0 0 1 172 0 0 53
11.0: 0 0 0 0 17 998 0 0 35
12.0: 0 0 0 0 0 0 0 0 26
18.0: 0 0 0 0 0 0 0 0 38
24.0: 0 0 0 0 0 0 0 0 47
36.0: 0 0 0 0 0 0 0 0 1
48.0:0 0 0 01680029
54.0: 0 0 0 0 0 0 0 0 5
TOTL: 6660 55683 832715 8697520 41 11513 0 0 12948
...
Table 36 describes the fields in this display.
Table 36. Output for show ap counters
Field Description
AP UNIVERGE WL Access Points number.
radio Radio number.
LastPktXferRate Data transmit rate, in Mbps, of the last packet
received by the AP.
NumCntInPwrSave Number of clients currently in power save mode.
LastPktRxSigStrength Signal strength, in dBm, of the last packet received
by the AP.
LastPktSigNoiseRatio Signal-to-noise ratio (SNR), in decibels (dB), of the
last packet received by the AP.
This value indicates the strength of the radio signal
above the noise floor. For example, if the noise floor
is -88 and the signal strength is -68, the SNR is 20.
If the value is below 10, this indicates a weak signal
and might indicate a problem in the RF environment.
TKIP Pkt Transfer Ct Total number of TKIP packets sent and received by
the radio.