Specifications

show ap counters
Chapter 12
AP Commands
378
show ap counters
Displays AP and radio statistics counters.
Syntax show ap counters [ap-number [radio {1 | 2}]]
Defaults None.
Access Enabled.
Usage To display statistics counters and other information for individual user
sessions, use the show sessions network command.
Examples The following command shows statistics counters for UNIVERGE WL
Access Points 7:
PROPMT# show ap counters 7
AP: 7 radio: 1
=================================
LastPktXferRate 2 PktTxCount 73473
NumCntInPwrSave 0 MultiPktDrop 0
LastPktRxSigStrength -89 MultiBytDrop 0
LastPktSigNoiseRatio 4 User Sessions 0
TKIP Pkt Transfer Ct 0 MIC Error Ct 0
TKIP Pkt Replays 0 TKIP Decrypt Err 0
CCMP Pkt Decrypt Err 0 CCMP Pkt Replays 0
CCMP Pkt Transfer Ct 0 RadioResets 0
Radio Recv Phy Err Ct 0 Transmit Retries 60501
Radio Adjusted Tx Pwr 15 Noise Floor -93
802.3 Packet Tx Ct 0 802.3 Packet Rx Ct 0
No Receive Descriptor 0 Illegal Rates
TxUniPkt TxUniByte RxPkt UndcrptPkt
TxMultiPkt TxMultiByte RxByte UndcrptByte
PhyErr
1.0: 1017 0 10170 0 14 8347 0 0 3964
2.0: 5643 55683 822545 8697520 3 1670 0 0 8695
5.5: 0 0 0 0 5 258 0 0 4
ap-number Index value that identifies the UNIVERGE WL Access
Points on the UNIVERGE WL Controller.
radio 1 Shows statistics counters for radio 1.
radio 2 Shows statistics counters for radio 2. (This option does not
apply to single-radio models.)