Specifications

show ap config
Chapter 12
AP Commands
376
mode Radio state:
• Enabled
• Disabled
channel Channel number.
antennatype External antenna model, if applicable.
tx pwr Transmit power, in dBm.
profile Radio profile that manages the radio. Until you
assign the radio to a radio profile, UNIVERGE WL
Control System assigns the radio to the default radio
profile.
auto-tune max-power Maximum power level the RF Auto-Tuning feature
can set on the radio.
• The value default means RF Auto-Tuning can set
the power up to the maximum level allowed for
the country of operation.
• A specific numeric value means you or another
administrator set the maximum value.
load-balance-group Names of the RF load-balancing groups to which the
UNIVERGE WL Access Point belongs. If the value
is None, the access point does not belong to any load
balancing groups.
Note: This field is displayed only if the UNIVERGE
WL Access Point is a member of a group.
load-balance-enable Whether RF load balancing is enabled for this
UNIVERGE WL Access Point.
force-rebalance Whether the UNIVERGE WL Access Points radio to
disassociates its client sessions and rebalance them
whenever a new UNIVERGE WL Access Point radio
is added to the RF load balancing group.
Table 35. Output for show ap config
Field Description