Specifications

set service-profile attr
Chapter 12
AP Commands
335
Access Enabled.
Usage To change the value of a default attribute for a service profile, use the set
service-profile attr command and specify a new value.
The SSID default attributes are applied in addition to any attributes supplied for
the user by the RADIUS server or the local database. When the same attribute is
specified both as an SSID default attribute and through AAA, then the attribute
supplied by the RADIUS server or the local database takes precedence over the
SSID default attribute. If a location policy is configured, the location policy rules
also take precedence over SSID default attributes. The SSID default attributes
serve as a fallback when neither the AAA process, nor a location policy, provides
them.
For example, a service profile might be configured with the service-type attribute
set to 2. If a user accessing the SSID is authenticated by a RADIUS server, and the
RADIUS server returns the vlan-name attribute set to orange, then that user has a
total of two attributes set: service-type and vlan-name.
If the service profile is configured with the vlan-name attribute set to blue, and
the RADIUS server returns the vlan-name attribute set to orange, then the
attribute from the RADIUS server takes precedence; the user is placed in the
orange VLAN.
You can display the attributes for each connected user and if they are set through
AAA or through SSID defaults by entering the show sessions network verbose
command. You can display the configured SSID defaults by entering the show
service-profile command.
Examples The following command assigns users accessing the SSID managed by
service profile sp2 to VLAN blue:
PROPMT# set service-prof sp2 attr vlan-name blue
success: change accepted.
The following command assigns users accessing the SSID managed by service
profile sp2 to the Mobility Profile tulip.
PROPMT# set service-prof sp2 attr mobility-profile tulip
success: change accepted.