Specifications

set radio-profile service-profile
Chapter 12
AP Commands
329
tkip-mc-time 60000 Uses Michael countermeasures
for 60,000 ms (60 seconds)
following detection of a
second MIC failure within 60
seconds.
transmit-rates 802.11a:
• mandatory:
6.0,12.0,24.0
• beacon-rate: 6.0
• multicast-rate:
auto
• disabled: none
802.11b:
• mandatory:
5.5,11.0
• beacon-rate: 5.5
• multicast-rate:
auto
• disabled: none
802.11g:
• mandatory:
1.0,2.0,5.5,11.0
• beacon-rate: 5.5
• multicast-rate:
auto
• disabled: none
Accepts associations only
from clients that support one
of the mandatory rates.
Sends beacons at the specified
rate (6 Mbps for 802.11a,
5.5 Mbps for 802.11b/g).
Sends multicast data at the
highest rate that can reach all
clients connected to the radio.
Accepts frames from clients at
all valid data rates. (No rates
are disabled by default.)
user-idle-timeout 180 Allows a client to remain idle
for 180 seconds (3 minutes)
before UNIVERGE WL
Control System changes the
client’s session to the
Disassociated state.
Table 34. Defaults for Service Profile Parameters
Parameter Default Value
Radio Behavior When
Parameter Set To Default
Value