Specifications

set radio-profile service-profile
Chapter 12
AP Commands
328
psk-phrase No passphrase
defined
Uses dynamically generated
keys rather than statically
configured keys to
authenticate WPA clients.
psk-raw No preshared key
defined
Uses dynamically generated
keys rather than statically
configured keys to
authenticate WPA clients.
rsn-ie disable Does not use the RSN IE in
transmitted frames. (The RSN
IE is required for 802.11i.
RSN is sometimes called
WPA2.)
shared-key-auth disable Does not use shared-key
authentication.
This parameter does not enable
PSK authentication for WPA.
To enable PSK encryption for
WPA, use the
set radio-profile auth-psk
command.
short-retry-count 5 Sends a short unicast frame up
to five times without
acknowledgment.
ssid-type crypto Encrypts wireless traffic for
the SSID.
static-cos disable Assigns CoS based on the QoS
mode (voice-extension, wmm,
or svp) or based on ACLs.
Table 34. Defaults for Service Profile Parameters
Parameter Default Value
Radio Behavior When
Parameter Set To Default
Value