Specifications

set radio-profile service-profile
Chapter 12
AP Commands
326
cac-mode none Does not limit the number of
active user sessions based on
Call Admission Control
(CAC).
cac-session 12 If session-based CAC is
enabled (cac-mode is set to
session), limits the number of
active user sessions on a radio
to 14.
cipher-ccmp disable Does not use Counter with
Cipher Block Chaining
Message Authentication Code
Protocol (CCMP) to encrypt
traffic sent to WPA clients.
cipher-tkip enable When the WPA IE is enabled,
uses Temporal Key Integrity
Protocol (TKIP) to encrypt
traffic sent to WPA clients.
cipher-wep104 disable Does not use Wired
Equivalent Privacy (WEP)
with 104-bit keys to encrypt
traffic sent to WPA clients.
cipher-wep40 disable Does not use WEP with 40-bit
keys to encrypt traffic sent to
WPA clients.
cos 0 If static CoS is enabled
(static-cos is set to enable),
assigns CoS 0 to all data traffic
to or from clients.
Table 34. Defaults for Service Profile Parameters
Parameter Default Value
Radio Behavior When
Parameter Set To Default
Value