Specifications

set radio-profile service-profile
Chapter 12
AP Commands
324
Syntax set radio-profile name rts-threshold threshold
Defaults The default RTS threshold for an AP radio is 2346 bytes.
Access Enabled.
Usage You must disable all radios that are using a radio profile before you can
change parameters in the profile. Use the set radio-profile mode command
.
Examples The following command changes the RTS threshold for radio profile
rp1 to 1500 bytes:
PROPMT# set radio-profile rp1 rts-threshold 1500
success: change accepted.
See Also
l set radio-profile mode on page 316
l show radio-profile on page 408
set radio-profile service-profile
Maps a service profile to a radio profile. All radios that use the radio profile also
use the parameter settings, including SSID and encryption settings, in the service
profile.
Syntax set radio-profile name service-profile name
name Radio profile name.
threshold Maximum frame length, in bytes. You can enter a value
from 256 through 3000.
radio-profile
name
Radio profile name of up to 16 alphanumeric characters,
with no spaces.
service-profile
name
Service profile name of up to 16 alphanumeric characters,
with no spaces.