Specifications

set radio-profile max-tx-lifetime
Chapter 12
AP Commands
312
See Also
l set radio-profile mode on page 316
l set radio-profile max-tx-lifetime on page 312
l show radio-profile on page 408
set radio-profile max-tx-lifetime
Changes the maximum transmit threshold for the AP radios in a radio profile. The
maximum transmit threshold specifies the number of milliseconds that a frame
scheduled to be transmitted by a radio can remain in buffer memory.
Syntax set radio-profile name max-tx-lifetime time
Defaults The default maximum transmit threshold for AP radios is 2000 ms
(2 seconds).
Access Enabled.
Usage You must disable all radios that are using a radio profile before you can
change parameters in the profile. Use the set radio-profile mode command
.
Examples The following command changes the maximum transmit threshold for
radio profile rp1 to 4000 ms:
PROPMT# set radio-profile rp1 max-tx-lifetime 4000
success: change accepted.
See Also
l set radio-profile mode on page 316
l set radio-profile max-rx-lifetime on page 311
l show radio-profile on page 408
name Radio profile name.
time Number of milliseconds. You can enter a value from 500
(0.5 second) through 250,000 (250 seconds).