Specifications

set ap radio radio-profile
Chapter 12
AP Commands
296
set ap radio radio-profile
Assigns a radio profile to an AP radio and enables or disables the radio.
Syntax set ap {ap-number | auto} radio {1 | 2}
radio-profile name mode {enable | disable}
Defaults None.
Access Enabled.
Usage When you create a new profile, the radio parameters in the profile are set
to their factory default values.
To enable or disable all radios using a specific radio profile, use set radio-profile.
Examples The following command enables radio 1 on AP 1 assigned to radio
profile rp1:
PROPMT# set ap 1 radio 1 radio-profile rp1 mode enable
success: change accepted.
See Also
l clear ap radio on page 271
l set ap radio mode on page 295
ap ap-number Index value that identifies the UNIVERGE WL Access
Points on the UNIVERGE WL Controller.
ap auto Sets the radio profile for the UNIVERGE WL Access Points
configuration profile. (See set ap auto on page 277.)
radio 1 Radio 1 of the UNIVERGE WL Access Points.
radio 2 Radio 2 of the UNIVERGE WL Access Points. (This option
does not apply to single-radio models.)
radio-profile
name
Radio profile name of up to 16 alphanumeric characters,
with no spaces.
mode enable Enables radios on the specified ports with the parameter
settings in the specified radio profile.
mode disable Disables radios on the specified ports.