Specifications

clear radio-profile
Chapter 12
AP Commands
275
clear radio-profile
Removes a radio profile or resets one of the profile’s parameters to its default
value.
Syntax clear radio-profile name [parameter]
Defaults If you reset an individual parameter, the parameter is returned to the
default value listed in Table 33 on page 317.
Access Enabled.
Usage If you specify a parameter, the setting is reset to its default value. The
settings of the other parameters are unchanged and the radio profile remains in the
configuration. If you do not specify a parameter, the entire radio profile is deleted
from the configuration. All radios that use this profile must be disabled before you
can delete the profile.
Examples The following commands disable the radios using radio profile rp1 and
reset the beaconed-interval parameter to its default value:
PROPMT# set radio-profile rp1 mode disable
PROPMT# clear radio-profile rp1 beacon-interval
success: change accepted.
name Radio profile name.
parameter Radio profile parameter:
• beacon-interval
• countermeasures
• dtim-interval
• frag-threshold
• max-rx-lifetime
• max-tx-lifetime
• preamble-length
• rts-threshold
• service-profile
(For information about these parameters, see the set
radio-profile commands that use them.)