Specifications

clear prompt
Chapter 4
System Services Commands
23
Access All.
Examples To clear the history buffer, type the following command:
PROMPT# clear history
success: command buffer was flushed.
See Also history on page 26
clear prompt
Resets the system prompt to its previously configured value. If the prompt was not
configured previously, this command resets the prompt to its default.
Syntax clear prompt
Defaults None.
Access Enabled.
Examples To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
PROMPT#
See Also set prompt on page 31. (For information about default prompts, see
“Command Prompts” on page 6.)
clear system
Clears the system configuration of the specified information.
Caution! If you change the IP address, any currently configured Mobility
Domain operations cease. You must reset the Mobility Domain.